I would appreciate some pointers on tillering R/D design

[Red Dwarf]

I have just glued up my first attempt at a R/D bow; 63" Bamboo backed Hickory, and really would appreciate some help on the basic approach required to successfully tiller this design.
Should I be aiming for getting the whole limb to work evenly or should certain sections be working more than others etc. etc.....
How is this best achieved etc. ......?

Thanks in advance


Red Dwarf

[attachment deleted by admin]

[nickf]

for the first inches of draw the limbs should straighten up, then at a certain drawlength, look perfectly straight.
go further, and try to get an even curve in both limbs.
It will probably look like a straight bow, but less bending, and it might look strange at the handle when tillering. try to ignore that.

If you're uncertain, check the taper.

Nick