« previous next »
Pages: [1]

Author Topic: Glue for horn nocks.  (Read 3225 times)

0 Members and 1 Guest are viewing this topic.

whitewoodshunter

  • Guest
Glue for horn nocks.
« on: April 09, 2009, 09:27:41 pm »
I'm getting ready to glue on some horn nocks on my BBM recurve and was wondering what kind of glue to use? I'm not sure what kind of horn they are as I got them in a trade, but the are a creamy white color.. and already pre- shaped I have some 2 ton epoxy?
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Glue for horn nocks.
« Reply #1 on: April 09, 2009, 09:49:33 pm »
Never tried it on ELB-style horn nocks, ,but I've glued a pile of tip overlays on with two-ton and never had one come off yet.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

whitewoodshunter

  • Guest
Re: Glue for horn nocks.
« Reply #2 on: April 09, 2009, 09:57:28 pm »
Well the horn tips are made for a recurve and are kinda flat. But I'm thinking the 2 ton epoxy might work. Only one way to find out!!!
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Glue for horn nocks.
« Reply #3 on: April 09, 2009, 10:00:41 pm »
It'll work well. Just rough both surfaces up a bit before you glue them.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Adam Keiper

  • Guest
Re: Glue for horn nocks.
« Reply #4 on: April 09, 2009, 10:27:56 pm »
2-ton epoxy has worked very well for me with both horn nocks and horn tip overlays.  Superglue Gel works well for horn tip overlays, too, but the mating surface must be dead flat.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Glue for horn nocks.
« Reply #5 on: April 09, 2009, 11:08:54 pm »
I've used 2 part epoxy and cyanoacrelates... both with good success. The super glue is good, cuz you can work the tip after only 10-15 mins.
Logged
Pages: [1]
« previous next »