« previous next »
Pages: [1]

Author Topic: 3 Rivers Hunting Trade points  (Read 5032 times)

0 Members and 1 Guest are viewing this topic.

Offline Runningbear

  • Member
  • Posts: 15
3 Rivers Hunting Trade points
« on: February 16, 2009, 06:56:46 pm »
Has anyone tried 3 River Trade Points they are 150 grains for about $17.00?
Brian. ;D
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 3 Rivers Hunting Trade points
« Reply #1 on: February 16, 2009, 11:14:15 pm »
Like these...



Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline TRACY

  • Member
  • Posts: 4,523
Re: 3 Rivers Hunting Trade points
« Reply #2 on: February 17, 2009, 09:39:30 am »
If you want to make your own, Venisonburger may have some stock band saw blades.
Logged
It is what it is - make the most of it!    PN500956

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 3 Rivers Hunting Trade points
« Reply #3 on: February 17, 2009, 09:43:24 am »
Brian, I bought those heads from 3Rivers a few years ago.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PeteC

  • Member
  • Posts: 2,014
Re: 3 Rivers Hunting Trade points
« Reply #4 on: February 17, 2009, 10:16:10 pm »
Brian ,they are easy to make from old circular saw blades,or band-saw blades.Just lay them out.Cut out,grind an edge,heat to cherry red,quinch in motor oil,haft to an arrow shaft,take a few test shots,then put a razor edge on them,and your ready to go huntin'. God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Runningbear

  • Member
  • Posts: 15
Re: 3 Rivers Hunting Trade points
« Reply #5 on: February 18, 2009, 12:47:09 am »
Thanks! I'll try making some of my own.
Brian. ;)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 3 Rivers Hunting Trade points
« Reply #6 on: February 18, 2009, 01:00:04 am »
The trades from 3Rivers are not for hunting. Not legal in most states because they are less than 7/8" wide. They are, however, a fairly traditional design of trade point.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

kerbinator

  • Guest
Re: 3 Rivers Hunting Trade points
« Reply #7 on: February 20, 2009, 07:15:46 pm »
Pat, what do you use to cut your circular saw blades that stuff it pretty hard.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 3 Rivers Hunting Trade points
« Reply #8 on: February 20, 2009, 08:24:09 pm »
I have had my best luck with a cold chisel and hammer. Score the metal and break it off. I tried a Dremil but used about 4 fiber blades on one trade point. I can buy broadheads cheaper than that. ;D I think a small side grinder with a carbide disc might be the way to go...unless you have a plasma cutter. :o 8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PeteC

  • Member
  • Posts: 2,014
Re: 3 Rivers Hunting Trade points
« Reply #9 on: February 21, 2009, 12:55:32 pm »
The easiest method I've found is using a chop saw with a metal cut off wheel.A cut off wheel,of the correct size, will also fit a mitre saw,or even a circular saw held in a vise.Be sure to wear a face mask,and ,or goggles, and heavy gloves, when doing this.You can cut the points out and grind them in minutes.It takes longer to lay them out than it does to build them. God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Mechslasher

  • Member
  • Posts: 1,046
Re: 3 Rivers Hunting Trade points
« Reply #10 on: February 23, 2009, 09:50:26 am »
i bought some off ebay from a fellow who sells them for $6 a dozen.  i couldn't make them for that price.  i think he stamps them out with a press.
Logged
"A liberal is someone who feels a great debt to his fellow man, which debt he proposes to pay off with your money." 

G. Gordon Liddy
Pages: [1]
« previous next »