Author Topic: B50 Dacron  (Read 16796 times)

0 Members and 1 Guest are viewing this topic.

Offline Dane

  • Member
  • Posts: 1,870
Re: B50 Dacron
« Reply #15 on: February 09, 2009, 07:29:15 pm »
I've never served the nocks, only the center of the string. I've never had any issues. I also keep my eyes on the string and replace it when I feel at all it is starting to wear too much. Strings are so easy to make, it is no big deal to make a new one.

Dane
Greenfield, Western Massachusetts

Offline AndrewS

  • Member
  • Posts: 798
Re: B50 Dacron
« Reply #16 on: February 10, 2009, 06:08:28 am »
I use the double loop strings as favourite and I use thin strings. Up to 55lbs I use 10 strands of dacron or 10 Strands of FF (with FF I put 6 extra strands of B50 to the loops). Over 55lbs I use strings with 12 strands up to 70 lbs.

nickf

  • Guest
Re: B50 Dacron
« Reply #17 on: February 10, 2009, 12:38:27 pm »
8strands is more than enough for bows below 60pounds, but I'd go a little thicker for comfort. Thin b-50 strings really cut your fingers ;)

b-50 is a nice stringmaterial, as long as you don't go far over 50pounds. Too much drawweight and it just stretches like a rubber band.

I'd rather get some dyneema of FF,,,

Nick

Offline TRACY

  • Member
  • Posts: 4,523
Re: B50 Dacron
« Reply #18 on: February 10, 2009, 01:45:41 pm »
I  twist up double loop 15 strand(3ply) of b-50. Mostly for nock fit w/ one layer of #4 serving. I keep the string waxed, especially the loops where there is more wear/contact w/ the nock ends.
Tracy
It is what it is - make the most of it!    PN500956

Offline acker

  • Member
  • Posts: 221
Re: B50 Dacron
« Reply #19 on: February 10, 2009, 04:11:21 pm »
Here is a link to a video, its in german, but it might help you.
http://www.youtube.com/watch?v=Lnn1aIZRb5w&feature=channel

here a link for a Buildalong for the board, on page 3 -> post from TomOfSevenhills there is a Pdf
http://www.free-archers.de/forum/index.php?topic=6359.30

acker
« Last Edit: February 10, 2009, 04:33:40 pm by acker »

Offline Twinkie_slayer

  • Member
  • Posts: 12
Re: B50 Dacron
« Reply #20 on: February 10, 2009, 11:51:54 pm »
8strands is more than enough for bows below 60pounds, but I'd go a little thicker for comfort. Thin b-50 strings really cut your fingers ;)

b-50 is a nice stringmaterial, as long as you don't go far over 50pounds. Too much drawweight and it just stretches like a rubber band.

I'd rather get some dyneema of FF,,,

Nick

 A properly built string of B-50 matched to the bow doesn't stretch any worse on a 100# bow than it does in a 50# bow  ::)

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: B50 Dacron
« Reply #21 on: February 10, 2009, 11:55:51 pm »
8strands is more than enough for bows below 60pounds, but I'd go a little thicker for comfort. Thin b-50 strings really cut your fingers ;)

b-50 is a nice stringmaterial, as long as you don't go far over 50pounds. Too much drawweight and it just stretches like a rubber band.

I'd rather get some dyneema of FF,,,

Nick
[/qu                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                hahaha! Of course this comes from your vast experience with this subject. Interesting advice there ! hahaha  ::)  ::) ::) ::) ::) ::) ::) ::) ::) ::)                                                                                                                                                                                                                                                                                                                                                                                                         
« Last Edit: February 11, 2009, 12:04:26 am by Coo-wah-chobee »

Offline stiknstring

  • Member
  • Posts: 376
Re: B50 Dacron
« Reply #22 on: February 11, 2009, 03:02:45 pm »
I am going to experiment with ten and twelve strand strings. I have heard some good things from guys shooting bows in the 70 pound range.  Mine are all 55 so I am thinking that ten will be good but may add some strands to the loop area and the serving areas to get a better nock fit with my arrows. 

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: B50 Dacron
« Reply #23 on: February 11, 2009, 03:45:54 pm »
I always use 14 strands for bows of around 60#  never had any probs . but I do use flemish twist (i think its called) which i believe to be stonger than a served endless loop type
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline Danny Roberts

  • Member
  • Posts: 18
Re: B50 Dacron
« Reply #24 on: February 15, 2009, 08:44:58 pm »
I use a 16 on everything.
Kentucky

Offline majsnuff

  • Member
  • Posts: 149
  • Shoot low boys the bad guys are riding ponies.
Re: B50 Dacron
« Reply #25 on: February 18, 2009, 11:48:33 pm »
I use 16 on everything above 45# 12 on 30 to 45# 10 on everything else.
keep it simple
make it fun